Hi!
I want to thank Todd again for the Rascal. It has been perfect for me in this mostly always Texas wind blown chop. This last Saturday the local surf forecast said there was no rideable surf but the Rascal showed them that there was rideable surf. The below email sure helped my ego too.

[.....Hey Jim ....you are my inspiration now because you are older than me and you were tearing it up out there. I definitely want to introduce you to my surfing buddy's. You will fit right in with our so called "Over the hill gang". Hopefully we'll have some good waves soon and we can hook up down in Galveston. Don't work too hard, Bobby... ]

Jim Lattis, 50, Katy, TX
7’6″ x 22 1/2″ x 2 3/4″ Lil’ Rascal Round Nose Fish, Custom Proctor Epoxy “PROXY”

…Hi Todd,

On Thursday through Saturday we had thunder storms and very high offshore winds. Then a cold front came through early Saturday evening and by Sunday morning there were clean waist to chest high waves. It was only the second time this winter that the conditions have been as good. I had a great day.

Thanks again for the Rascal. It has truly helped bring back a magical time in my life.

I absolutely love being in the water again….Jim

surfboard review: custom epoxy round nose fish surfboards

See the Lil’ Rascal Movies……

Charissa,

I just wanted to wish you and Todd a happy and successful new year. I love my 5′ 6″ “lil rascal” and have gotten some fun waves here in so cal and in Mexico. I look forward to riding more of your boards in the future.

Sincerely,

Christian Balogh
(Very happy customer)

Hi Charissa,

Everything went smooth and the board is really, really sick. I’ve been out on it a bunch already and am getting used to it and loving it at the same time.

I LOVE the shape and the board turns really well and carries it speed much better than my shortboard in the crappy waves – exactly what I wanted so THANKS -

I’M STOKED!!

Can’t wait to get out again more this week!!!

Best,
Colin, Puerto Rico
custom Proxy epoxy Lil’ Rascal
5′11″ x 20 1/4″ x 2 3/8″, Future FT1 fins

Good morning Kids,

Hope you had a great Easter and were able to relax this weekend?

Thanks for having my board ready

and I simply love it………..It’s my favorite board now…

………….thank goodness,

because I was beating the heck out of my twin fin………

Thanks,
Dale

Custom Surfboard:
Proxy Epoxy construction: Performance Twin 6’0″ x 19″ x 2 1/2″

Hi Charissa,

Merry Chrismas and Happy New Year to you and Todd.

My two 6 channels single fin are perfect.

I’ve surfed the 6’6. It’s a very fast board
going up and down very easily.
This is the perfect all around surfboard for me.
I will bring the 6’8 in march 07
during my next boat trip in Maldives outer atolls.
Vincent

Vincent Tourtoulou, 43, Anglet, France
6’6 x 20″ x 2 5/8 6 Channel Single Fin

surfboard review: custom 6 channel single-fin surfboards, france surf

Hey you guys…

First shot today on Lil Rascal – more to come for sure.

Truly thanks for all your hard work and unreal boards.

Chris Stanger/ SantaCruz Ca   :::   5’9″ x 19 5/8″ x 2 3/8″ Lil’ Rascal

Hi Charissa,
My Twin Fang arrived yesterday and of course I surfed it yesterday.

The conditions were 2ft. and weak and I had a blast. I was picking off waves I had no shot at with my other boards.

It is going to be a fun summer in Santa Cruz.

My thanks to you and Todd and I will definetly keep Proctor in mind when I add to my quiver in the future.
Thanks,
Steve Craver, Santa Cruz, CA
Twin Fang: 5’9″ x 21″ x 2 1/2″, Glass-on twin fins

Hi Todd,

I haven’t talked to you since I got my EPS “Ridiculous” single fin with side bites (6’4″ x 20″ x 2 5/8″) a year ago October. Thought you should know I’m still loving it. People at “Uppers” (Trestles) continue to comment on it and how well I surf on it.

And my wave count is through the roof.

Anyhow, I’m about ready to make some quiver changes and the “lil Rascal” is sounding a bit tempting. I’ve been riding the “Ridiculous” with a 5 1/2 inch single and the small longboard side fins.

I really like the positive, flowy feeling of the single fin- especially backside because I’m goofy footed.

I have ridden it as a twin and a half and didn’t care much for it. So, here’s the question. Would you recommend the “lil Rascal” with a similar fin set-up? I’m curious because it looks like a board I could surf a bit more radically. The nose, rocker, and outline looks very similar between these two boards, thus the transition would be easy between the two. The “lil Rascal” seems like you’ve trimmed the fat, shortened, and put a more pure twin set-up on it than the “Ridiculous”. Is this the case, and how could it be adapted for a 6’2″ tall, 35 yrs. old weighing 175lbs? I’d love to believe I surf as good as Jay, but…. Would you recommend a 6′ 0″ x 20 x 2 5/8″?” Too big or small?

I’d love for it to paddle similar to my current board (or better if you can work miracles).

As always,

Thanks for your time and attention to detail.

Sincerely,

Mark Quest

6’4″ x 20″ x 2 5/8″ Ridiculous Small Wave Wonder, Single Fin thumbtail/roundpin
custom flexible epoxy surfboard construction

Visit the Lil’ Rascal page and watch the movies

Todd….

the rascal is holding up well and has been riding really great,
absolutely love that board, honestly the best shape for me in smaller
conditions I’ve ever owned!

It’s great to be able to do fast short board maneuvers in the small stuff.

Before the rascal I could barely surf in the
small conditions without a log.

Thanks Todd, great design!

Be blessed

- Kip K, North Carolina
Custom Proctor Epoxy “PROXY” Surfboard: 6’3″ x 21 1/4″ x 2 7/8″ Lil’ Rascal

Hey Charissa,

I am writing this in regards to my 5′ 6″ Lil’ Rascal custom board.

The board is insane and is now my go to board for anything h/h and under (even though I will ride it in bigger clean surf).

Todd’s dimensions for me were right on and the epoxy is better than any of my XTR boards. Even the boards grey color is a nice change and I can NOT wait to get on a Blackbird or SR71. Thanks to Todd for answering every question I had and making sure this board was going to be magic. And to you Charissa for your superb customer service and making this process painless and getting my board to my doorstep just as promised. I am stoked.

Sincerely,

Christian B., Los Angeles, CA
Custom Proctor Epoxy “PROXY” Surfboard: 5’6″ x 19 1/2″ x 2 5/16″ Lil’ Rascal